Hanging instructions star sign circle

Our star sign circles are digitally printed on a high-quality non-woven substrate. This brings a number of advantages:

• clean and easy to apply
• easy to dry-strip, even years later!

PLEASE NOTE: Always check in advance whether the circle corresponds to the order and check carefully for any errors and/or defects. Complaints on processed circles will not be accepted.

Wall preparation:
Make sure the wall is dry, smooth, clean, free of dust, and neutrally coloured.
Remove all spots and even out any colour differences, as these may show through the non-woven wallpaper. Any holes or cracks must be filled and sanded smooth. Highly absorbent surfaces should be primed.

Application:
Use a methylcellulose-based wallpaper paste that is suited for use with non-woven wallpaper. Prepare the paste as directed on the packaging. Avoid heat and draught when processing the wallpaper. Apply the paste on the back of the circle, using a mohair roller. Apply the circle on the wall and press it on with a spatula or soft brush in order to remove any air bubbles. Remove glue spots immediately after applying the circle. Do this carefully (do not scrub!) while the glue is still wet, use a soft cloth or sponge that is not too damp. Afterwards, pat dry with another soft cloth.

The above instructions should be regarded as general recommendations. Due to possible differences in surface and/or work situations, these processing
instructions can never be complete in all cases.